Skip to main content
ToolCube – All tools at one place.

PPM to mg/L Converter

Convert parts per million to milligrams per liter for water samples, where 1 ppm ≈ 1 mg/L.

  • ppm to mg/L preselected
  • Instant results
  • Formula and chart

Convert units

1

1 ppm = 1 mg/L

Formula

mg/L = ppm × 1

1 part per million = 1 mg/L

mg/L ≈ ppm and µg/L ≈ ppb only for water (dilute aqueous solutions).

All conversionsfor 1 ppm

Concentration conversions for 1 parts per million
UnitValue
0.0001
1
1,000
1,000,000
1
1,000

Guide

Why ppm and mg/L match in water

Parts per million is a ratio: one part of a substance in a million parts of the mixture, usually by mass. Milligrams per liter is a mass in a volume. They are equal only when one liter of the mixture weighs one kilogram, because a milligram is one millionth of a kilogram.

Pure water at room temperature weighs very close to 1 kg per liter, and so do dilute solutions such as drinking water, pool water and most environmental samples. For these, 1 ppm ≈ 1 mg/L, and water test kits and reports use the two interchangeably. mg/L ≈ ppm and µg/L ≈ ppb only for water (dilute aqueous solutions).

Typical values

Total dissolved solids (TDS) in drinking water are often between 50 and 500 ppm, and many guidelines treat values below about 600 mg/L as good. Swimming pools are usually kept at 1 to 3 ppm of free chlorine. Nitrate in drinking water is limited to 50 mg/L by World Health Organization guidelines.

For seawater (about 1.025 kg per liter), brines, syrups or fuels, the density is not 1, so ppm and mg/L differ. For gases, ppm usually means parts per million by volume, and converting to mg/m³ requires the gas's molar mass.

ppb, µg/L and trace amounts

Very small amounts, such as lead or arsenic in drinking water, are reported in parts per billion or micrograms per liter. In water, 1 ppb ≈ 1 µg/L, and 1,000 ppb is 1 ppm. The World Health Organization guideline for arsenic is 10 µg/L, which is 0.01 mg/L, or 0.01 ppm.

When a report mixes units, convert everything to one unit before comparing with a limit. A lead reading of 0.005 mg/L is the same as 5 µg/L (5 ppb), which can be compared directly with a guideline written in µg/L. The concentration category in the converter covers ppm, ppb, ppt, mg/L and µg/L for exactly this.

Formula

mg/L = ppm × 1

Example: 1 part per million = 1 mg/L.

Parts per million to milligrams per liter chart

Parts per million (ppm)Milligrams per liter (mg/L)
0.10.1
0.50.5
11
22
33
55
1010
5050
100100
150150
300300
500500
600600
1,0001,000
2,0002,000

Values are rounded to 4 decimal places. Use the converter above for any other value, or the concentration converter for every concentration unit.

FAQ

Frequently Asked Questions

Answers to common questions about PPM to mg/L on ToolCube.

Is 1 ppm equal to 1 mg/L?

For water and dilute aqueous solutions, yes, approximately, because a liter of water weighs about 1 kg. For other liquids it depends on their density.

How do I convert ppm to mg/L for seawater?

Multiply ppm by the density in kg/L. For seawater at about 1.025 kg/L, 100 ppm is about 102.5 mg/L.

What is a good TDS level in ppm?

Drinking water with a TDS below about 300 ppm is usually considered excellent, and below about 600 ppm good, based on WHO taste guidance.