One converter for everyday and technical units
Measurements reach us in a mix of systems. A recipe from the United States asks for cups and ounces, a property listing gives an area in marla or square feet, a weather app shows Fahrenheit, and a new hard drive looks smaller on your computer than on the box. This unit converter puts all of those in one place, with exact conversion factors and a formula you can check, so you do not have to search for a different calculator each time.
The tool works without a Convert button. As soon as you type, the result changes, and a table shows the same value in every unit of the category. Tap a row of that table to make it the target unit. The swap button reverses the conversion, and the page address updates so you can bookmark or share exactly what you see.
The 11 categories
- Length: millimeters, centimeters, meters, kilometers, inches, feet, yards, miles, nautical miles.
- Weight: milligrams, grams, kilograms, tonnes, ounces, pounds, stone, tola, maunds.
- Temperature: degrees Celsius, degrees Fahrenheit, kelvins.
- Area: square meters, square kilometers, square feet, square yards, acres, hectares, marla, kanal.
- Volume: milliliters, liters, cubic meters, teaspoons (US), tablespoons (US), cups (US), fluid ounces (US), pints (US), gallons (US), gallons (UK).
- Speed: meters per second, kilometers per hour, miles per hour, knots.
- Time: seconds, minutes, hours, days, weeks, months, years.
- Data Storage: bits, bytes, kilobytes, megabytes, gigabytes, terabytes, kibibytes, mebibytes, gibibytes, tebibytes.
- Pressure: pascals, kilopascals, bar, pounds per square inch, atmospheres.
- Energy: joules, kilojoules, calories, kilocalories, kilowatt-hours.
- Concentration: percent, parts per million, parts per billion, parts per trillion, milligrams per liter, micrograms per liter.
Common conversions at a glance
These are the values people look up most often, worked out with the same factors the converter uses.
| From | Equals |
|---|
| 1 inch | 2.54 cm |
| 1 foot | 0.3048 m |
| 1 mile | 1.6093 km |
| 1 kilogram | 2.2046 lb |
| 1 ounce | 28.3495 g |
| 1 tola | 11.6638 g |
| 100 degrees Celsius | 212 °F |
| 1 acre | 0.4047 ha |
| 1 kanal | 20 marla |
| 1 gallon (US) | 3.7854 L |
| 1 cup (US) | 236.5882 mL |
| 1 mile per hour | 1.6093 km/h |
| 1 gibibyte | 1.0737 GB |
| 1 bar | 14.5038 psi |
| 1 kilocalorie | 4.184 kJ |
Exact definitions, clean results
Many conversions are exact by definition. Since 1959 an inch has been exactly 2.54 cm and a pound exactly 0.45359237 kg; a US gallon is exactly 3.785411784 liters and a standard atmosphere exactly 101,325 pascals. The converter stores these definitions and calculates with full precision. Only the number you see is rounded, to 2, 4 or 6 decimal places as you prefer.
Computers store decimals in binary, which can produce results such as 0.30000000000000004. The converter removes that noise before showing a value, and switches to scientific notation, such as 6.2137 × 10⁻⁷, when a result is too large or too small to read as a normal number.
Honest notes about tricky units
- Marla and kanal are not the same size everywhere. Traditional land revenue records use a marla of 272.25 sq ft and many housing societies use 225 sq ft. Pick the size under Options; a kanal is always 20 marla. See the marla to square feet page for both sizes side by side.
- Tola and maund use the standard values of 11.6638 g and 37.3242 kg. Local markets have used other values in the past, so check the definition in any contract.
- Data storage has decimal units (KB, MB, GB, TB, steps of 1000) and binary units (KiB, MiB, GiB, TiB, steps of 1024). Both are labelled clearly; see MB to GB.
- Concentration: mg/L ≈ ppm and µg/L ≈ ppb only for water (dilute aqueous solutions).
- Months and years in the time category are averages (30.44 and 365.25 days), suitable for estimates rather than calendar dates.
Tips for accurate conversions
- Convert once from the original measurement instead of converting a rounded result again, which adds rounding errors.
- For areas and volumes, use the area or volume units rather than converting a length and squaring or cubing it by hand.
- Temperature differences convert differently from temperatures: a rise of 10 °C is a rise of 18 °F, not 50 °F.
- Need the time in another city rather than a length of time? Use the Time Zone Converter.